天天搜  范文大全 

加工贸易合同范本中英文版

 

《中华人民共和国海关加工贸易货物监管办法》(海关总署令第219号)规定,加工贸易,是指经营企业进口全部或者部分原辅材料、零部件、元器件、包装物料(以下简称料件),经加工或装配后,将制成品复出口的经营活动,包括进料加工、来料加工。

今天小编要与大家分享的是:

加工贸易合同范本(中文版)

合同号:______  合同号:______

签约地点:______________

日期: _________

甲方:________

地址:__________

电话:__________

传真____________

乙方:________

地址:__________

电话:__________

传真____________

根据平等互利原则 有限公司与有限公司友好协商特约签定本合同

一、双方承诺:由乙方提供不作价设备 美元(港币)给甲方用于加工生产 之用,(详见设备清单)。产权归乙方所有。使用期限为 年,在监管期限内,不得擅自在境内销售、串换、转让、抵押或者移作他用。到期后如不续签,则由甲方协助乙方申报海关核准后处理。乙方以免费方式提供设备,不需甲方办理付汇进口,也不需用加工费或差价偿还设备款。

二、甲方向乙方购买原料、辅料

商品品名及规格 原料 辅料

编码、单位数量、单价金额、品名、单位数量、单价金额

合计

三、甲方供乙方制成品的数量及金额

商品编码品名及规格单位数量单价金额

合计

四、乙方供料于____________________ 起运抵 _______________

甲方制成品于_________________ 日前运往______________

五、运输方式及运费用 六、保险费负担

七、付款方式 八、包装要求

九、仲裁:因执行本合同所发生的争议或与本合同有关的一切争议,双方应通过友好协商解决,如果协商不能解决,应提交中国国际贸易促进委员会根据该会仲裁程序进行仲裁,仲裁裁决为最终裁决,对双方都有约束力。

十、本合同一式八分,由签字双方各执一分,其余六分报送有关部门备案。

甲方(盖章 )

乙方(盖章)

加工贸易合同范本(英文版)

THE CONTRACT FOR SINO-FOREIGN COOPERATIVE JOINT VENTURE

Chapter 17 Liability for Breach of Contract

Article 42 Should the cooperative venture company be unable to continue itsoperation or achieve its business purpose due to the fact that one of thecontracting parties fails to fulfil the obligations prescribed by thecontract and articles of association, or seriously violates the provisionsof the contract and articles of association, that party shall be deemed tohave unilaterally terminated the contract. The other party shall have theright to terminate the contract in accordance with the provisions of thecontract after approval by the original examination and approvalauthority, and to claim damages. In case Party A and Party B of thecooperative venture company agree to continue the operation, the party whofails to fulfil its obligations shall be liable for the economic lossescaused thereby to the joint venture company.

Article 43 Should either Party A or Party B fail to provide on schedule thecontributions in accordance with the provisions defined in Chapter 5 ofthis contract, the party in breach shall pay to the other party________Yuan, or __________% of the contribution starting from the firstmonth after exceeding the time limit. Should the party in breach fail toprovide after ______months, _________Yuan, or _________% of thecontribution shall be paid to the other party, who shall have the right toterminate the contract and to claim damages from the party in breach inaccordance with the provisions of Article 42 of the contract.

Article 44 Should all or part of the contract and its appendices be unable to befulfilled owing to the fault of one party, the party in breach shall bearthe liability therefor. Should it be the fault of both parties, they shallbear their respective liabilities according to the actual situation.

Article 45 In order to guarantee the performance of the contract and itsappendices, both Party A and Party B shall provide each other with bankguarantees for performance of the contract within __________days after thecontract comes into force.

Chapter 18 Force Majeure

Article 46 Should either of the parties to the contract be prevented fromexecuting the contract by force majeure, such as earthquake, typhoon,flood, fire, war or other unforeseen events, and their occurrence andconsequences are unpreventable and unavoidable, the prevented party shallnotify the other party by telegram without any delay, and within 15 daysthereafter provide detailed information of the events and a valid documentfor evidence issued by the relevant public notary organization explainingthe reason of its inability to execute or delay the execution of all orpart of the contract. Both parties shall, through consultations, decidewhether to terminate the contract or to exempt part of the obligations forimplementation of the contract or whether to delay the execution of thecontract according to the effects of the events on the performance of thecontract.

Chapter 19 Applicable Law

Article 47 The formation, validity, interpretation, execution and settlement ofdisputes in respect of, this contract shall be governed by the relevantlaws of the People’’s Republic of China.

Chapter 20 Settlement of Disputes

Article 48 Any disputes arising from the execution of, or in connection with, thecontract shall be settled through friendly consultations between bothparties. In case no settlement can be reached through consultations, thedisputes shall be submitted to the Foreign Economic and Trade ArbitrationCommission of the China Council for the Promotion of International Tradefor arbitration in accordance with its rules of procedure. The arbitralaward is final and binding upon both parties.

Article 49 During the arbitration, the contract shall be observed and enforced byboth parties except for the matters in dispute.

Chapter 21 Language

Article 50 The contract shall be written in Chinese and in ____________. Bothlanguage versions are equally authentic. In the event of any discrepancybetween the two aforementioned versions, the Chinese version shallprevail.

Chapter 22 Effectiveness of the Contract and Miscellaneous

Article 51 The appendices drawn up in accordance with the principles of thiscontract are integral parts of this contract, including: the projectagreement, the technology transfer agreement, the sales agreement etc.

Article 52 The contract and its appendices shall come into force commencing fromthe date of approval of the Ministry of Foreign Trade and EconomicCooperation of the People’’s Republic of China (or its entrustedexamination and approval authority).

Article 53 Should notices in connection with any party’’s rights and obligationsbe sent by either Party A or Party B by telegram or telex, etc., theWritten letter notices shall be also required afterwards. The legaladdresses of Party A and Party B listed in this contract shall be theposting addresses.

本文地址:https://www.ttso.cn/a/lvoj8o.html

与“加工贸易合同范本中英文版”相关的文档有哪些?

  • 贸易出口合同中英
  • 贸易合同又称契约或合约,是进口出口双方当事人依照法律通过协商就各自的在贸易上的权利和义务所达成的具有法律约束力的协议。以下是小编为大家精心准备的:贸易出口合同中英3篇,欢迎参考阅读!...

  • 对外贸易合同范本中英
  • 贸易合同又称契约或合约,是进口出口双方当事人依照法律通过协商就各自的在贸易上的权利和义务所达成的具有法律约束力的协议。...

  • 对外贸易合同范本中英对照
  • 对外贸易合同范本中英对照  合同编号:_________________  contractno:_______________  签订日期:_________________  date:_____...

  • 加工合同范本3篇
  • 《中华人民共和国海关加工货物监管办法》(海关总署令第219号)规定,加工,是指经营企业进口全部或者部分原辅材料、零部件、元器件、包装物料(以下简称料件),经加工或装配后,将制成品复出口的经营活动...

  • 5篇实用加工合同范本
  • 贸易合同又称契约或合约,是进口出口双方当事人依照法律通过协商就各自的在贸易上的权利和义务所达成的具有法律约束力的协议。下面是小编收集整理的5篇实用加工合同范本,欢迎借鉴参考。  ...

  • 加工合同
  • 加工是指一国通过各种不同的方式,进口原料、辅料和零件,利用本国的生产能力与技术,加工成成品后再出口,从而获得增值收益。加工合同是怎样的呢?以下是小编为大家整理的加工合同范文,欢迎参考阅读。...

  • 来料加工合同范本
  • 加工顺应了这个历史潮流,成为当代国际分工和国际贸易的一种主要形式。...

  • 货物出口合同范本英文
  • 出口合同是进口商出口商双方当事人依照法律通过协商就各自的在贸易上的权利和义务所达成的具有法律约束力的协议。出口商的出口合同是为销售产品而订立的合同,因此它也被称为销售确认书和销售合同。  ...

  • 中英外贸合同范本
  • 外贸合同是国际贸易中的重要文件,也是一种必不可少的法律依据,而商务英语正是从事国际贸易专业人员不可或缺的语言,也是外贸合同中的主要语言。...

  • 服装出口贸易合同范本中英
  • 贸易合同一经有效成立,当事人就要承担履行合同规定的义务——出口方须按约完成交货义务,就可依法对他要求赔偿。...

    版权声明:

    1、本网站发布的文章《加工贸易合同范本中英文版》为天天搜网友原创或整理,版权归原作者所有,转载请注明出处!

    2、本网站文档/文章《加工贸易合同范本中英文版》仅代表作者本人的观点,与本网站立场无关,作者文责自负。

    3、本网站一直无私为全国网友提供大量优秀文档范文,免费帮助网友审核文档,评改文档。对于不当转载或引用本网内容而引起的民事纷争、行政处理或其他损失,本网不承担责任。

    Top